Pick your city for solar sizing with local peak sun hours and the matching distribution company, or use the wizard directly.
Free
No signup
Runs in your browser
Assumptions you can edit
Find it on your electricity bill as “units consumed”. Use an average of several months.
System type
Optional: estimate payback
Divide the total of a recent bill by its units to get your average rate. The estimate assumes the solar units replace grid units at that rate. Under net billing, exported units are credited at a lower buyback rate, so savings can be smaller.
Your solar estimate
Solar array needed
3.81
kW
550 W panels
7
panels
Installed array
3.85
kWp
Inverter size
3.5
kW
Monthly production
505
kWh
Roof area
21
m² (222 ft²)
Panels alone at the current market rate (PKR 41/W): about PKR 157,850. This excludes inverter, battery, mounting, cables, installation and approvals.
Uses 5.3 peak sun hours, 14% system losses and 96% inverter efficiency (82.6% combined), sized to offset 500 units a month on average. Summer output is higher and winter lower than this average.
Each city gets a different amount of sunshine, so the same monthly units need a different number of panels. City pages pre-fill a planning value for peak sun hours.
Can I use this outside Pakistan?
Yes. Choose 'Other' and enter your own peak sun hours. The formulas do not depend on location.
Planning estimate, not an installation design. Results use average sun hours and standard loss assumptions. Real output varies by season, shading, tilt, temperature and equipment. Have a qualified installer verify sizing, protection, earthing and utility requirements before purchase.