1,200 units • panels • inverter • battery

Solar System for 1,200 Units per Month

A home or shop using 1,200 units a month needs about 9.1 kW of solar at the national average of 5.3 peak sun hours. Check your city below, then adjust the wizard for your panel size and backup needs.

  • Free
  • No signup
  • Runs in your browser
  • Assumptions you can edit

Find it on your electricity bill as “units consumed”. Use an average of several months.

System type
Optional: estimate payback

Divide the total of a recent bill by its units to get your average rate. The estimate assumes the solar units replace grid units at that rate. Under net billing, exported units are credited at a lower buyback rate, so savings can be smaller.

Your solar estimate

Solar array needed
9.14
kW
550 W panels
17
panels
Installed array
9.35
kWp
Inverter size
8
kW
Monthly production
1,227
kWh
Roof area
50
m² (540 ft²)

Panels alone at the current market rate (PKR 41/W): about PKR 383,350. This excludes inverter, battery, mounting, cables, installation and approvals.

Uses 5.3 peak sun hours, 14% system losses and 96% inverter efficiency (82.6% combined), sized to offset 1,200 units a month on average. Summer output is higher and winter lower than this average.

Quick answer for 1,200 units

Array
9.1 kW
Panels (550 W)
17
Inverter
8 kW
Roof area
50 m²

Calculation: 1200 ÷ 30 = 40 units per day; 40 ÷ (5.3 × 0.8256) = 9.14 kW. The 0.8256 factor combines 14% system losses with 96% inverter efficiency.

Panels needed for 1,200 units by panel size

PanelPanelsInstalled array
450 W219.45 kWp
550 W179.35 kWp
585 W169.36 kWp
620 W159.3 kWp
700 W149.8 kWp

1,200 units: solar size by city

Sunnier cities need a smaller array for the same units. Peak sun hours are planning averages from the site's city dataset, not measured values.

CitySun hoursArray550 W panels
Abbottabad4.810.1 kW19
Attock5.39.1 kW17
Bahawalpur5.78.5 kW16
Chakwal5.39.1 kW17
Charsadda5.29.3 kW17
Dera Ghazi Khan5.68.7 kW16
Dera Ismail Khan5.68.7 kW16
Faisalabad5.39.1 kW17
Gilgit4.610.5 kW20
Gujranwala5.19.5 kW18
Gujrat5.19.5 kW18
Gwadar5.68.7 kW16
Hyderabad5.58.8 kW17
Islamabad5.19.5 kW18
Jhang5.49 kW17
Jhelum5.29.3 kW17
Karachi5.49 kW17
Kasur5.29.3 kW17
Khuzdar5.78.5 kW16
Kohat5.49 kW17
Lahore5.19.5 kW18
Larkana5.68.7 kW16
Mardan5.29.3 kW17
Mianwali5.58.8 kW17
Mirpur5.19.5 kW18
Mirpurkhas5.58.8 kW17
Multan5.68.7 kW16
Muzaffarabad4.710.3 kW19
Nawabshah5.78.5 kW16
Nowshera5.39.1 kW17
Okara5.39.1 kW17
Peshawar5.39.1 kW17
Quetta5.88.4 kW16
Rahim Yar Khan5.78.5 kW16
Rawalpindi5.19.5 kW18
Sahiwal5.49 kW17
Sargodha5.49 kW17
Sheikhupura5.29.3 kW17
Sialkot59.7 kW18
Skardu4.610.5 kW20
Sukkur5.68.7 kW16
Swat4.99.9 kW18
Turbat68.1 kW15

Net metering vs net billing in Pakistan

In February 2026 NEPRA replaced net metering with a net-billing model for new solar consumers. Under net billing, units you export are credited at a lower buyback rate than the price you pay for imported units, so using more of your own solar output directly (daytime loads, or a battery) is worth more than exporting it. Reports put agreements signed before 9 February 2026 outside the new rules, and sources differ on the exact new rate. Read the report.

Rules and rates have been revised more than once, so confirm the current buyback rate and eligibility with NEPRA or your distribution company before you decide on system size or a battery.

Frequently asked questions

What size solar system do I need for 1200 units per month?

About 9.1 kW of panels at 5.3 peak sun hours. Depending on the city (4.6 to 6 sun hours in the dataset) it ranges from 8.1 kW to 10.5 kW. Installers usually round up to the next standard size.

How many solar panels are needed for 1200 units?

17 panels of 550 W (9.35 kWp installed) at the national average. With 620 W panels it is 15 panels; with 450 W panels it is 21.

What inverter size suits a 1200-unit solar system?

Around 8 kW, from the array size divided by a typical DC/AC ratio of 1.2. The inverter must also cover your peak simultaneous load and motor starting surge, so check your appliances with the load calculator.

How much roof space does it need?

About 50 m² (542 sq ft) for 17 panels of 550 W, including a 15% allowance for access and spacing.

How big a battery do I need for 1200 units a month?

1200 units a month is an average load of about 1.67 kW. Running that average load for 4 hours takes roughly 8.1 kWh of LiFePO₄ battery. Most homes back up only essential loads, which needs far less. Use the wizard to size your own backup.

Will the system cover all 1200 units every month?

On average yes, because it is sized to offset 1200 units. Summer months produce more than the average and winter months less, so you may export surplus in summer and import some units in winter.

More solar tools

Planning estimate, not an installation design. Results use average sun hours and standard loss assumptions. Real output varies by season, shading, tilt, temperature and equipment. Have a qualified installer verify sizing, protection, earthing and utility requirements before purchase.